ROTARY UNION-DPR 250 F03-15

Material:- Typically made from brass, bronze, plastic, steel, or stainless steel
Pressure Range:- Usually measured in pounds per square inch (psi)
Speed Range:- Usually measured in revolutions per minute (rpm)
Number of Ports:- Typically between 1 and 8
Seal Type:- Made from materials like nitrile, fluoropolymer elastomers, ethylene propylene (EPDM), polyurethane, or silicone
Operating Temperature:- Varies based on the material and design, often ranging from -40°C to 200°C or higher
Flow Rate:- Depends on the size and type of the rotary union
Torque:- Varies based on the application and design
Port Types:- Straight ports direct media flow straight through, while elbow ports cause the media to exit at an angle
Thread Types:- Common thread types include national pipe thread (NPT), British standard pipe (BSP), and unified coarse thread (UNC)
Applications:- Used in textiles, clutches and brakes, automobiles, chemicals, paper, rubber and plastics, food and pharmaceuticals